Properties of lift-off structured high Tc microbridges

Microbridges and DC SQUIDs (superconducting quantum interference devices) were fabricated, using a lift-off technique, from RF sputtered YBaCuO films on MgO single-crystal substrates. Microwave measurements at 9 GHz on microbridges and the magnetic-field dependence of their critical current reveal wide bridge behaviour up to temperatures near the maximum operating temperature of the bridge. Mostly, a linear dependence of the critical current on the temperature is found, which is connected with high intrinsic 1/f noise if the bridge is constant-current-biased slightly above the critical current. In some bridges and DC SQUIDs, regimes with a temperature dependence proportional to (1-T/Tc)1.5 are found. In this case the 1/f noise level is much smaller and SQUID modulation can be followed to about 65

Temporal characteristics of the influence of punishment on perceptual decision making in the human brain

Perceptual decision making is the process by which information from sensory systems is combined and used to influence our behavior. In addition to the sensory input, this process can be affected by other factors, such as reward and punishment for correct and incorrect responses. To investigate the temporal dynamics of how monetary punishment influences perceptual decision making in humans, we collected electroencephalography (EEG) data during a perceptual categorization task whereby the punishment level for incorrect responses was parametrically manipulated across blocks of trials. Behaviorally, we observed improved accuracy for high relative to low punishment levels. Using multivariate linear discriminant analysis of the EEG, we identified multiple punishment-induced discriminating components with spatially distinct scalp topographies. Compared with components related to sensory evidence, components discriminating punishment levels appeared later in the trial, suggesting that punishment affects primarily late postsensory, decision-related processing. Crucially, the amplitude of these punishment components across participants was predictive of the size of the behavioral improvements induced by punishment. Finally, trial-by-trial changes in prestimulus oscillatory activity in the alpha and gamma bands were good predictors of the amplitude of these components. We discuss these findings in the context of increased motivation/attention, resulting from increases in punishment, which in turn yields improved decision-related processing

Parameter study of in-situ grown superconducting YBaCuO thin films prepared by laser ablation

A parameter study has been made of YBaCuO thin films prepared by laser oblation. The films were deposited on SrTiO3, MgO, and Si with ZrO2 buffer layer at substrate temperatures between 600°C – 800°C. With optimization of different parameters like substrate temperature, pulse frequency, target-substrate distance, and oxygen pressure, zero resistivity was derived for the in-situ grown films on SrTiO3 at 89.5 K, on MgO at 84.6 K, and on Si (ZrO2) at 83.5 K

In-situ growth studies of sputtered ybco thin films by spectroscopic ellipsometry

Using spectroscopic ellipsometry we studied in-situ the growth of off-axis sputtered YBa2Cu3O6+x thin films on (001) SrTiO3 as a function of the deposition parameters. Especially in the very first growth stage (<5 nm) we observed that the optical properties of the grown layer differs from the "bulk" optical properties of YBCO and strongly depends on, both, the deposition temperature and the oxygen partial pressure. Both properties are well established as influencing the superconducting properties of thin YBCO films. YBCO thin film growth under optimal deposition conditions (Tcnot, vert, similar90 K; jc>106A cm¿2 @ 77 K) is smooth and homogeneous, except for the first unit cell layer (initial stage regime). The smoothness of the response is indicative for a step-mode like growth mechanism. In contrast, the initial stage regime is governed by a 2D nucleation mechanism. This behaviour changes when the deposition temperature is lowered. Due to increased disorder, the initial stage regime is extended to larger thicknesses and a true 2D growth mode is no longer apparent. Similar behaviour is observed with increasing oxygen partial pressure, where the optical response is shifted from a step-flow mode like mechanism to an island-growth mode

The changing face of irrigation in Kenya: opportunities for anticipating changes in Eastern and Southern Africa

Small scale systems / Environmental effects / Government managed irrigation systems / Farmer managed irrigation systems / Health / Waterborne diseases / River basins / Pest control / Social impact / Water policy / Water law / Institutional development / Water allocation / Drip irrigation / Pumps / Technology / GIS / Databases / Irrigation programs / Drainage / Water resource management / Economic aspects / Social aspects / Water scarcity / Conflict / Case studies / Land management / Sedimentation / Flood control / Wetlands / Water quality / Erosion / Grassland management / Livestock / Rain / Drought / Participatory management / Design / Credit / Horticulture / Farmers’ associations / Farmers’ attitudes / Gender / Rice / Legislation / Land tenure / Cooperatives / Income / Southern Africa / Eastern Africa / Kenya / Upper Ewaso Ng’iro North Basin / Lake Victoria Basin / Tana River Basin / Mwea Irrigation Scheme

Seismicity investigations in the Cascade Mountains and vicinity, Oregon, 1 May 1969 - 30 April 1970

Seismicity in Cascade Mountains and vicinity, Orego

Superconducting Mg-B films by pulsed laser deposition in an in-situ two-step process using multi-component targets

Superconducting thin films have been prepared in a two-step in-situ process, using the Mg-B plasma generated by pulsed laser ablation. The target was composed of a mixture of Mg and MgB2 powders to compensate for the volatility of Mg and therefore to ensure a high Mg content in the film. The films were deposited at temperatures ranging from room temperature to 300 degrees C followed by a low-pressure in-situ annealing procedure. Various substrates have been used and diverse ways to increase the Mg content into the film were applied. The films show a sharp transition in the resistance and have a zero resistance transition temperature of 22-24 K.Comment: 4 pages, 3 figures, submitted to Applied Physics Letter